Skip to main content

A Step-by-step guide to post-processing a thingiverse Darth Vader without any sanding or acetone Part 1

EQUIPMENT USED:

  • Plastic plate
  • Soft Paint brush
  • Clean water
  • Methylated spirits
  • Soft, clean cloth
  • Hair dryer or fan.

PRODUCTS USED:

  • Poly-clean Plastic Cleaner
  • Proto-fill Liquid Plastic (Jet black Ultra-matte finish)



3D Printed Part - Before Post-Processing


METHOD:
First clean your object’s surface with Poly-clean Plastic Cleaner.

Before using Proto-fill, be sure to stir the contents thoroughly before you start, as the ingredients tend to settle on the bottom. The product may be sprayed if you have the equipment. Use a disposable plastic plate to place your model on, which are made from a type of plastic, that Proto-fill won’t stick to. Some take-away containers and lids are also suitable.

Brush the first coat of Proto-fill, in a horizontal direction, or in the direction of the grooves. The product goes on like a liquid plastic and is shiny when it’s wet and dries to a matte finish. Because of the rich nature of the resin-system, allow the product time to self-level and even out before applying low heat from a hairdryer or air movement from a fan.


After First Coat - Drying Process
DRYING:
Depending on your environment and how thickly you apply the coating, it takes around 20-30 minutes to air dry. A hair dryer (only ever on a low setting) or a fan can be used to speed up the drying process. Movement of air over your model is more important than applying heat. Too much heat will dry the top layer, but because there is still liquid underneath, it can cause the coating to craze slightly. This is easily rectified, however.

Once the coating is touch-dry, use a brush or soft smooth cloth, dipped in methylated spirits to re-soften and smooth the coating. Never sand the coating at this early stage, as you may tear the coating film. This “smoothing” technique will also fix any dried runs or drips. Being water-based, there is virtually no smell when applying or after drying; great for students or people who don’t have dedicated post-processing areas. Spills can be cleaned up with water or methylated spirits.

As the Proto-fill dries, it reduces by around 25%. Two coats seem to be sufficient to fill most fine print lines. Some deeper print lines may require additional coats. Although the product is viscous, it is still a very thin coating and intricate details are retained, just one coat of the matte finish makes most printed objects appear less “plasticky” and more like a moulded object. It is a good practice to address any runs or bubbles, in between coats.

Applying the second coat


Final result after drying

"ADJUSTING” THE COATING:
Once the products is touch-dry, use methylated spirits on a cloth or your paint brush to soften and “re-distribute” the product and even out areas which may have been over-filled. After a few coats, there is no need to apply more product, instead re-distribute the product from where there is too much, to areas which need more coverage. This technique is almost like, being able to pause time and resume when you’re ready. Making fine adjustment is like photo editing, you can add detail in, or take detail out. When you start sanding or vapour smoothing an object, there’s no going back.

Up next: We will be applying a colour coat to the same part. Stay tuned for PART 2.

For more information or to buy Poly-Clean and Proto-Fill, visit https://www.objective3d.com.au/coating-systems/

Popular posts from this blog

Delivering High Quantities of Prototypes Fast

Objective3D Direct Manufacturing produces parts using a range of additive and conventional manufacturing technologies. We offer tailored solutions for your project’s needs. If your project requires larger quantities of small parts – fast, Laser Sintering is the best technological solution for you. Per-part pricing is reduced as quantities increase, but there are more advantages to using Laser Sintering for small prototypes than price alone. Laser Sintering (LS) provides strong, versatile and geometrically intricate components made from filled and un-filled nylon materials that are ideal for fit and form verification and functional testing. Prototypes made with LS are created quickly and offer robust solutions for your project. FAST Delivery Laser Sintering can provide sturdy, functional prototypes as little as 24 hours. Multi-component designs can be incorporated into single structures, allowing engineers to produce complex features and geometries in one print, and elim

How Artec Space Spider helps measure the shape-shifting of birds in response to climate change.

Challenge:  In the past century, researchers have been studying a variety of birds in Australia to see how their bodies have changed as a result of global warming in order to determine how to adjust. In order to document the exact dimensions of thousands of beaks of 86 different species of birds in museums in a fast, accurate, and convenient manner, they needed a fast, accurate, and convenient method. Solution: Artec Space Spider, Artec Studio Results: By using the handheld 3D scanner Artec Space Spider, each bird can be scanned in submillimeter colour 3D in approximately two minutes. This makes it easy to scan anywhere from 30-50 birds in one museum visit. Scan processing takes just under six minutes for each bird. PhD candidate Sara Ryding 3D scanning an Australian galah (Eolophus roseicapilla) with Artec Space Spider (image credit: Sara Ryding) One of the most startling impacts of global warming has taken place for decades now: multiple species of birds around the world have been

3D scanning and reverse engineering streamline original furniture design and production

MU Form Furniture Design is an Oakland-based company that designs, manufactures and distributes furniture products for the modern home and business. The company is never short of orders since good and original design is sought after by architects and interior designers. The main material MU Form works with is high-quality bent ply, which is one of the most widely used materials in this industry due to its ability to create a variety of shapes for chairs, stools, and tables. The company’s specialists seek to create great designs that pose a challenge for other manufacturers to copy or replicate. The V Dining Chair in red and grey, designed by MU Form’s Po Shun Leong. “Our designers are tasked to develop furniture designs that require a significant amount of trial and error by developing physical prototypes of chairs and stools,” says Mark Leong, CEO of MU Form. To produce a new original piece of furniture, MU Form would normally ship a physical prototype model to a factory